Dacor Dishwasher F1 Code: Inlet Valve Fault
F-1 INLET VALVE on older EDW/IDW dishwashers means no water was detected in the sump after the fill.
Dacor MDH24S dishwasher — model notes, common issues and what to have ready before booking.
A 24-inch Dacor dishwasher leaves less room behind the door than a full-width unit, which affects how a technician reaches the door hardware and the lower basket. The MDH24S has no fuel choice, so service depends on water movement, door sealing, and controls. Water that stays after a cycle, dishes that come out dull, a door that does not latch, and a leak all point to different routes through the diagnosis. Note which symptom started first and whether it occurs on every load. In the booking form, list the model MDH24S, the order in which problems began, and any code the display shows.
MDH24S is a Dacor 24″ dishwasher. The model number is printed on the rating label, usually on the edge of the door or the side of the tub, visible when the door is open; match it letter for letter before booking.
Check the rating label on the edge of the door or the side of the tub, visible when the door is open. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note the cycle used, whether water is left in the tub, and any code or flashing light.
F-1 INLET VALVE on older EDW/IDW dishwashers means no water was detected in the sump after the fill.
F-2 CIRCULATION PUMP on older EDW/IDW dishwashers reports no relay closure on the power board.
Older Dacor EDW/IDW dishwashers show F3 when the controller sees no water temperature rise during wash and rinse.
Older Dacor EDW/IDW dishwashers show F4 when water remains in the sump after the drain cycle.
Dacor EDW/IDW dishwashers list F9 as WPS SENSOR.
Dacor dishwasher repair: common problems, safe checks, model and error-code resources, and when to book professional dishwasher service.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.