Dacor Wall Oven Code F0: Shorted or Jammed Input
Dacor Technical Manual: F0 is an ERC failure code for an input device that is shorted or jammed.
Dacor ERD30 dual fuel range — model notes, common issues and what to have ready before booking.
The crew will want to know whether the trouble sits in the gas cooktop or the electric oven of this dual fuel range before they start. For the Dacor Epicure ERD30, ask yourself which burner struggles to light and whether the oven displays the set temperature. Uneven baking, a stuck control, and a light that stops working all narrow the search in different directions. Two or three sentences about the last cook are usually enough to start. Describe the symptom in your own words, and say whether the other half of the range still works normally. In the booking form, enter ERD30 with the Epicure series and the symptom you chose.
ERD30 is a Dacor 30″ dual fuel range from the Epicure line. The model number is printed on the rating label, usually on the frame behind the storage or warming drawer, or around the oven door opening; match it letter for letter before booking.
Check the rating label on the frame behind the storage or warming drawer, or around the oven door opening. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note whether the problem is on the cooktop, the oven, or both, and the fuel type.
Dacor Technical Manual: F0 is an ERC failure code for an input device that is shorted or jammed.
Dacor Technical Manual: F1 is an ERC watchdog alarm that beeps until cancel or another function is chosen.
Dacor Technical Manual: F2 is raised on runaway heat or when the temperature exceeds the runaway limits.
F3 flags a shorted oven temperature sensor on older Dacor ERC ovens. The manual says to check the sensor and wiring if cancel does not clear it.
F4 on an older Dacor ERC oven points to an open temperature sensor circuit, which can make the controls look broken.
F6 means the ERC control's stored checksum no longer matches its software. On older Dacor ovens only time of day and timer keep running.
On older Dacor ERC ovens, F7 signals a clean lock or phase circuit failure lasting 16 seconds. The manual points to the door lock switches and door adjustments.
Dacor range repair: common problems, safe checks, model and error-code resources, and when to book professional range service.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Fields marked with * are required.